Platinum T2

  • Machine img
  • Machine img
  • Machine img
  • Machine img
  • Machine img
  • Machine img
  • Machine img
  • Machine img

Platinum: high productivity and top performance

Suitable for medium and large industries, the Platinum was designed to provide high performance. In fact, it can seal up to 8 tonnes of product/hour and up to 150 packages/minute. The interactive touch screen lets you change all the settings in an easy and intuitive manner.

Cleaning and sanitization

All AMC machines are designed to be thoroughly washed and sanitized thanks to special solutions applied on the structural and optional components. Moreover, the electrical panel and pneumatic control unit have been insulated and separated to ensure full access for proper sanitization. The surfaces on which the products are conveyed are designed in such a way as to prevent liquids and product residue from accumulating

T2: Speed and automatic format change

The integrated dual sealing station is AMC Packaging Solutions' pride and joy. Indeed, it is the first company in the world to offer this solution.

The Platinum T2 series consists of 2 linear machines merged together with key benefits for production: 

  •  avoids having to change moulds: it is possible to pack different formats of containers of different heights without changing the mould. This can be done by simply recalling the desired recipe/program from the operator panel with the touch of a finger and the machine will automatically reset itself starting from the unstacking machine to the ejection of the final product. This way the mould change does not require specialised personnel
  • option of mounting 2 different reels on the same machine, switching from one production to the next without taking any action on the machine or changing the reel and without interrupting production
  • no production stop when the film reel ends: if it ends, production can be transferred to sealing tower 2 or 1 simply via the operator panel. In the meantime you can comfortably replace the reel that has finished
  • it is possible to mount just one electronic printer (instead of 2, one for each sealing station) that can print on both reels thanks to a sliding unit for the printing gun, all to the benefit of the customer with considerable savings
  • less space: a Platinum T2 machine takes up much less space compared to two machines in line with a single sealing station

Parts of the Platinum series

Structure

Structure and transmission entirely made with AISI 304 stainless steel.

Brushless motor

Motion with latest-generation brushless motor to ensure high reliability.

Self-lubricating guides
The self-lubricating guides ensure high reliability and protection from water, salt, acids and chemical solvents. They do not require maintenance and lubrication. The chains are made with AISI 304 stainless steel

Control with intuitive touch-screen panel
The touch-screen control panel makes operating every machine component extremely intuitive: changing programs and setting individual operating parameters such as speed, format or temperatures and sealing times are just a fingertip away. Moreover, the simplified graphics let you easily reach any desired option

Cell catenary
The catenary consists of modular cells that transfer the containers from the unstacking stage up to the ejection of the finished product. The whole chain unit with the modules is made with AISI 304 stainless steel.

Safety
Protection of operators on the machine is guaranteed by AISI 304 stainless steel accident-prevention protections, 3/10mm thick Lexan panels and safety microswitches that block the machine when the doors  that provide access to operating areas are opened. Moreover, there are two emergency buttons both on the operator panel and in the product loading area. It is possible to request optional machine stop buttons to be installed where indicated by the customer.

Pneumatic system
Self-lubricating control/pneumatic unit with separate discharges. Using quality components is essential to achieving top reliability for pneumatic machines, especially when operating environmental conditions are extreme, as in dairies. This is why we only choose leading global suppliers of pneumatic systems. The pneumatic system is self-lubricating and reduces the need for maintenance to a minimum.

Reel-holder
The self-centring stainless steel reel-holder shaft with clutch lets you load the reel with just one step and always keep it at the centre of the production line. The clutch lets you constantly keep the film well stretched in order to ensure there are no creases and the packaging is perfectly sealed.

Drawing control
The film drawing control with motorised time or notch-based clutch rollers: the unit lets you limit film scrap to a minimum during production. It can be set based on two parameters: either based on the time or based on the notch impressed on the film. Therefore, it allows for a number of adjustments.

Mounted calender
Sealing calender made with AISI 304 stainless steel and Anticorodal, fitted with self-lubricating bushings and Anticorodal. The parts of the calender's structure are mounted. This is to ensure absolute precision between the parts during the assembly stage, thereby allowing for maximum linearity and reliability, as well as silence during the operation of the sealing bell. It is so precise that there is no need for gaskets to seal the container, which further reduces the number of components subject to normal wear.

Double mounted calender
The Silver machine has 2 sealing stations in line to allow to change the format/mould automatically. They are made with AISI 304 stainless steel and Anticorodal, fitted with self-lubricating bushings and Anticorodal. The parts of the calender's structure are mounted. This is to ensure absolute precision between the parts during the assembly stage, thereby allowing for maximum linearity and reliability, as well as silence during the operation of the sealing bell. It is so precise that there is no need for gaskets to seal the container, which further reduces the number of components subject to normal wear.

Product presence photocell
It lets you conduct an analytical check on the presence of the product. It there are one or several containers and/or products missing, it is possible to set two options:
a) they are ejected without sealing, without stopping the machine and without wasting any film.
b) it is possible to set the machine to stop if there is an empty container in order to fill it.

Centred printing photocell
8. Centred printing photocell. It lets you print the company's material on the film and always have it impressed in a central position. It is possible to save the position of the photocell via the touch-screen keyboard to make mould change procedures easier.

Mould
All AMC machines are supplied as standard with a mould that comes with a 20 mm AISI 304 stainless steel counter-mould and accessories. Under optimal conditions, it takes just 5 minutes to change the mould. Each mould cavity has its own resistor that controls its temperature and can be changed directly on the touch-screen panel.  The counter-mould does not have any gaskets (there are fitted only in the gas vacuum version), thanks to the fact that the mould and counter-mould fit very accurately.

2 moulds included
All AMC machines in the Platinum T2 series are supplied as standard with 2 moulds that come with a 20 mm AISI 304 stainless steel counter-mould and accessories. The mould change process is entirely automatic and can be set with a simple with a simple touch of a finger. Each mould cavity has its own resistor that controls its temperature and can be changed directly on the touch-screen panel.  The counter-mould does not have any gaskets (there are fitted only in the gas vacuum version), thanks to the fact that the mould and counter-mould fit very accurately.

Optional extras

To be able to meet your needs in the best possible way, upon request, AMC's standard automatic thermosealing machines can be fitted with:

  • Single/double/triple format unstacking machine
  • Multi-head weighing machine
  • Integrated automatic weighing machine
  • Volumetric dosers
  • Flowmetric dosers
  • Product shakers
  • Vacuum/MAT gas
  • Automatic mould change
  • Thermal transfer graphic printer
  • Inkjet printers
  • Mechanical markers
  • Single/double/triple automatic lid-fitting device
  • Single/double/triple sealing applicator
  • Other accessories upon request

Back